Are you trying to figure out how to lower your thermostat without increasing your energy bill? The aim is to reduce heat sources and eliminate heat that has built up within your home. When it comes to cooling your house, you can use cost-effective methods. Get more info about Anytime Heating, Cooling and Plumbing.
Cold air should be able to move easily in your rooms, so arrange furniture and drapes so that ventilation from registers is not obstructed.
Using a whole-house fan or ceiling fans to circulate the air in the building. Alternatively, switch your heating/cooling thermostat to “fan only.” In a space that is 2 or 3 degrees warmer than a still room, constant air movement can make you feel at ease. A two-percentage-point increase in your thermostat equals a two-percentage-point reduction in your energy bill.
Place awnings over windows that face the sun or close drapes and shades. Also, consider using a low-cost heat-reflecting window film. This will keep your home cleaner and reduce glare and ultraviolet rays, all of which can damage your furniture and floors.
To improve performance, clean and replace the air filters in your furnace.
If your machine doesn’t already have one, get one and learn how to use it properly. When you’re at work, set the thermostat to a few degrees higher. When you’re away from home, turn off the air conditioner.
Reduce humidity inside your home because air conditioners work hard to extract moisture from the air. If at all possible, avoid doing laundry, showering, or cooking throughout the day. Switch on ventilating fans, but be sure to turn them off when you’re done so they don’t remove cooled air from the house unnecessarily.
Reduce the loss of cool air by weatherizing your home with caulk, weather stripping, and insulation to reduce air movement from the inside to the outside and vice versa.
Consult an air conditioning contractor about installing dampers to prevent cooled air from flowing into rooms that are rarely used. Also, close any doors or registers in those spaces, but consult a professional to ensure that this won’t affect your system’s performance.
If your air conditioner is old, it could be using much more energy than is required to keep your home cool.
By insulating your attic, you can reduce heat transfer through the roof and walls. This will provide you with the most convenience at the lowest cost.
In the attic, instal a foil radiant barrier. Enable an air space between the foil and the roof sheathing by stapling it to the underside of the roof rafters. Staples should be spaced about 3 inches apart. Seams should be centred on the rafters and sealed with a bead of caulking compound between sheets of foil. To provide cover, plant trees, big bushes, and vines. If you want to let the sun warm your home during the winter, choose deciduous varieties. Make sure they aren’t blocking any breezes when you plant them.
When you desperately need them, switch off incandescent lights and heat-generating appliances. When it’s time to prepare, instead of using the oven and stovetop, use the barbecue.